To find a case by dimensions, please visit our Case Finder page.
If your question has not been answered below, please contact us.
There are various degrees of impermeability and these are sub-divided into IP protection categories. The degree of protection is designated by a 2-digit system. The first digit denotes the degree of protection against solid substances; the second digit gives the degree of protection against water. Depending on the product line, there are containers which offer protection against water spray, IP 54 (K470), protection against water jets, IP 65 (Mitraset or K470 IP 65) as well as immersion-proof or moisture vapor proof containers IP 67 (K475, P472).
Yes, ZARGES USA is ITAR Certified and registered with the DDTC.
Yes, models K470, K424 XC and K475 can be locked with a 6mm shackle-type lock. In addition, lead seals using a 3mm seal wire may be employed. The K411 comes standard with lockable fasteners. Installed locks are also an option for the K470.
Yes, we offer a shackle lock with 3-digit, user-determined number combination which can be opened by USA TSA agents without damage.
ZARGES cases are rated to operate in extreme temperatures from -112°F to 302°F.
We can install several types of foam at our Charlotte, NC, Tech Center, including polyethylene, polyurethane, and antistat. Please contact us to discuss your requirements.
1, 1.5 or 2mm thicknesses depending on series and size of container. The equivalent would be 18 gauge, 15 gauge or 12 gauge aluminum sheet.
Tests show a maximum carrying capability of 66 lbs. per handle.
Cases with two handles are rated for 132 lbs. Cases with fourhandles are rated for 264 lbs. Load capacity can be increased further by fitting a pallet underneath.
Yes, we can emboss your message or trademark using DIN standard lettering. Lettering height is approximately 3/4″, single or multiple line, with a maximum line length of approx. 16 characters. Please fill out our Custom quote form for more details.
$81.68 per case. We have Hazmat certification for some of the cases we offer. We are certified for packaging groups I,II,III. Typically, modification of any kind to the containers will not allow us certify and the modified container must go through individual testing for certification. Please contact us for more information.
Yes, we can email you a 3D file upon request, if you contact us. You will be required to sign an NDA before we can send the file.
We deliver the K475 and Mitraset unpainted as standard, because aluminum does not need paint to protect it against corrosion. However, ZARGES will provide painting for an additional charge.
Aluminum pallets may be bolted on or tack welded. Wooden pallets and Secupal pallets may be bolted on.
Yes, please contact us to discuss your needs.
If you are purchasing on the website, the credit card must be with a United States bank. You can however, use an international card if you call the office to place your order.
If you call the office to place your order, we can ship to Canada. For anywhere else outside of the US, we can ship to the customer’s freight forwarding company located within the US.
Yes, with shipping terms EX WORKS. Customer is responsible for contracting the shipper and for all customs duties and fees.
We can create one-off customized products, but it is more cost-effective with a minimum of ten items.
Yes, a list is available on our Manufacturer Representative page.
No, we only offer aluminum cases.
All of our cases are constructed by ZARGES in Germany, and we have a Tech Center in Charlotte, NC, for customization. We are not in need of additional manufacturers at this time.
TISOAA is the agency who handles our advertising and marketing. Please contact them at firstname.lastname@example.org with your inquiries.