- ISO certifiedFacilities in Charlotte, NC and Germany
- RoHS compliantRestricted hazardous substances
- BAM-certified testingIn-house test lab, Germany
- CMMC 2.0 Level 2 ReadyUS defense cybersecurity standard
PICK WHERE YOU START
SIZED TO THE
MILLIMETER
A K470 re-engineered around your equipment: length, width and height set to the millimeter, with handles, D-rings, casters or forklift provisions fitted in the same build. Configure it below and request a quote.

Opens our quote form with this configuration filled in, for your review before submitting. Finishes shown are representative; RAL and FED-STD 595 colors are matched to order.
A NEW SIZE WITHOUT A NEW MOLD
A plastic case comes in the sizes its mold makes. Ours are fabricated from aluminum sheet, so a new size starts with a drawing.
A different size means designing and building a new mold. For most programs that ends the conversation.
The K470 changes size to the millimeter, with extra handles, D-rings or forklift provisions added in the same build.
FOAM CUT TO
THE SHAPE
ZARGES designs hundreds of custom foam interiors a year. Send your equipment's CAD file and we CNC-cut an insert that holds every piece in its own pocket, in polyethylene, polyurethane, anti-static, conductive or fire-retardant foam, with dividers and strapping where the load needs them.
WHAT WE NEED FROM YOU
- Preferred · fastest and most accurate3D CAD modelsSTEP files (.step or .stp) of the outside of your equipment. Strip out internal parts; we only need the external geometry.
- Option 2Dimensioned drawingsA fully dimensioned PDF drawing of the outside of each item, or the exact cavity sizes you need (L x W x H).
- Option 3 · slowestPhysical sampleSend the equipment and we measure it. It adds engineering time and cost, so we use it only when no CAD or drawing exists.
Links, brochures, photos and “a little bigger” help us understand the job, but a design starts from measurements: if a dimension or clearance matters, give us the number. We sign NDAs on request, and ZARGES USA is CMMC 2.0 Level 2 Ready for Controlled Unclassified Information.

DESIGNED FROM A
BLANK SHEET
When no standard case is close, our engineers start from your equipment: housings with I/O panels and cooling units, and containers welded to aluminum pallets, built at any scale.
Quote a custom build
FROM DRAWING TO DELIVERY
Every custom build runs through the ZARGES Tech Center in Charlotte: designed in 3D, foam cut in house, finished on the bench, and shipped from the same city. Charlotte and ZARGES in Germany are both ISO certified, with an in-house BAM-certified test lab in Germany.
- 01
Send your spec
Dimensions, a drawing or the gear itself. Tell us what goes in, what it weighs and how many you need.
- 02
We model it in 3D
Our engineers design the case and its interior around your equipment.
- 03
You approve
Nothing is built until you sign off on the design.
- 04
We build it
About 14 weeks from approval for a custom size.
- 05
We deliver
Your cases arrive built, fitted and ready to load.
OUT OF THE TECH CENTER
EVERYTHING WE BUILD
Engineering
- 3D modeling of the case and its interior
- 3D simulation before anything is built
- Drawings for your approval
CNC foam inserts
- Custom designs in polyethylene, polyurethane and specialty foam
- Anti-static, conductive and fire-retardant foam
- Plastic or aluminum divider plates and load spreaders
- Nylon strapping and buckles, Velcro
Components installed
- I/O panels and bezel plates
- Lifting rings, tie-down rings, extra handles
- Forklift provisions, hole cutouts, cooling units
- Aluminum pallets welded to the container, custom stacking features
Paint and graphics
- RAL commercial colors, or FED-STD 595 and CARC for military
- Stencils and silk-screen graphics
- Logos in any font and size
- Labeling
Advanced protection
- CARC (Chemical Agent Resistant Coating)
- Solvent and water-based applications
Approvals
- Non-standard sizes
- UN approval for hazardous materials
FREQUENTLY ASKED QUESTIONS
Can ZARGES build a K470 case to a custom size?
Yes. Because the K470 is fabricated from aluminum sheet rather than molded, we change its length, width and height to the millimeter to fit your equipment. Extra handles, D-rings, lifting and tie-down rings, casters and forklift provisions can be added in the same build.
How long does a custom case take?
About 14 weeks from design approval for a custom-size case. Production starts once you sign off on the design.
Does a custom size cost more than a standard case?
At 50 units or more, a custom-size K470 costs about the same as a standard case. A molded plastic case would need a new mold, typically $200,000 or more, before the first case is made.
What foam can you cut for a custom interior?
We CNC-cut inserts in polyethylene, polyurethane and specialty foams, including anti-static, conductive and fire-retardant foam, with plastic or aluminum dividers, load spreaders and strapping where the load needs them.
What do you need from me to design a custom foam interior?
A list of everything going in the case and how many of each, the orientation you want, any size, weight or clearance limits, and any dangerous goods such as lithium batteries. For the equipment itself, STEP files of its outside shape are fastest and most accurate; fully dimensioned drawings or the exact cavity sizes also work, and a physical sample is the last resort.
Can ZARGES sign an NDA or handle CUI?
Yes. We can sign our standard NDA or yours before any data is exchanged, and we only need the outside geometry of your equipment. Controlled Unclassified Information should be marked and sent through an approved process; ZARGES USA is CMMC 2.0 Level 2 Ready.
Can you build large or fully custom containers?
Yes. Our engineers design from your equipment: equipment housings with I/O panels and cooling units, containers welded to aluminum pallets, and large-scale builds on casters.
Where are ZARGES custom cases engineered?
At the ZARGES Tech Center in Charlotte, North Carolina. ZARGES runs ISO certified facilities in Charlotte and Germany, with an in-house BAM-certified test lab in Germany.
How do I get a quote for a custom case?
Send us the outside size you need or a drawing, what goes in the case and what it weighs, and how many you need. Use the builder on this page or the contact form, and we come back with a design.

