Featured Case
F-Series 1 Battery Case

LITHIUM-ION BATTERY CASES

UN-certified for hazardous materials

Built on the flagship ZARGES K470 transit case — lightweight aluminum, MIL-STD-810 tested — with interiors made for batteries. Trusted by the U.S. Navy, Army and Marines.

Packing Group I
UN Certification
MIL-STD-810 Tested
Durability
Class 9 Lithium-Ion
Hazard Class
Find Your Case

Cases by Battery Brand

Select a battery brand to list the ZARGES cases built for it.

Open ZARGES C-Series battery case lined with intumescent glass fiber cushions
C-Series

Contains a battery fire that has already started

ZARGES C-Series cases contain special intumescent glass fiber cushions and have been tested to contain thermal runaway under specific conditions. Built for batteries that may be compromised, or prototypes not yet UN 38.3 certified.

The product is not guaranteed to prevent thermal runaway from starting or spreading beyond the enclosure. See the FAQ below for details of the ZARGES C-Series battery testing.

C-Series thermal runaway test

A battery fire started inside a C-Series case, and contained. See the C-Series FAQ for the test conditions.

Open ZARGES F-Series battery case with fire-resistant anti-static foam lining and UN certification mark
F-Series

Prevents the damage that leads to a battery fire

ZARGES F-Series cases are lined with Fire Resistant Anti-Static (FRAS) foam to protect undamaged, UN 38.3 certified batteries from the water, dust and impact that can lead to thermal runaway. Interiors are cut for eFoil, Brentronics and general-purpose packs.

The product is not guaranteed to prevent thermal runaway from starting or spreading beyond the enclosure. See the FAQ below for details of the ZARGES F-Series battery testing.

Battery Information Center

Lithium-ion batteries can present significant risks to life and property if not handled or stored properly.

While ZARGES provides a reliable level of protection, it remains the user's responsibility to ensure lithium-ion batteries are stored and transported safely, in full compliance with government regulations.

Common Questions

FAQ

Most commercially sold UN 38.3 certified batteries are generally safe. Many variables can cause a battery fire — technically "thermal runaway" — including:

  • Physical damage. A battery that has been in a collision may be punctured, crushed, or internally damaged. F-Series cases are intended to offer superior protection against physical damage.
  • Excessive heat. Use near a heat source or fire, or exposure to the sun. Batteries generate heat while charging — never charge batteries inside a case or an enclosed space.
  • Overcharging beyond the maximum voltage, or improper charging with chargers or cables that do not meet the battery manufacturer's specifications.
  • Manufacturing defects such as poor-quality materials or construction.

No. There is no transportable, commercially available case that is fireproof. The term is commonly used but misleading: no material is completely immune to fire.

ZARGES C-Series cases have undergone fire testing with specific batteries to ensure that a battery fire can be contained inside the case for the battery under test, preventing the fire from spreading beyond the case. That testing was conducted under specific battery and environmental conditions, which will vary in your application. Fire testing and performance validation is the responsibility of the user.

C-Series 40582 test data (PDF) →
The F-Series case is lined with Fire Resistant Anti-Static (FRAS) foam. It is intended to store and transport UN 38.3 certified batteries that are undamaged. Combined with the ZARGES case, it provides maximum protection against the damage that might result in a battery fire (thermal runaway). Batteries that are damaged in any way should be disposed of immediately, in accordance with local, state, and federal regulations.

The C-Series case is designed to store and transport batteries that may have been compromised in some way, or prototype batteries that have not been UN 38.3 certified. C-Series cases have undergone fire testing with specific batteries to ensure a battery fire can be contained inside the case for the battery under test. Specially designed intumescent fiber pillows help contain the fire and filter a portion of the toxins emitted during it.

Testing was conducted under specific battery and environmental conditions, which can vary. Fire testing and performance validation is the responsibility of the user.

C-Series 40582 test data (PDF) →

Yes. Our white paper Lithium Battery Hazardous Containment covers the design decisions behind these cases: why aluminum over plastic, steel or carbon fiber; what the inner lining has to do during a thermal event; and the test results behind the C-Series.

It documents a forced thermal event on a cell rated at 814 Wh at 100% state of charge, with no propagation of fire to the two adjacent cells and a maximum exterior surface temperature below 300°F, plus fire-resistant anti-static foam on all six inner faces and hydrogen fluoride gas filtered to 2 ppm per 260 ft².

Read the white paper (PDF)

A ZARGES case is only UN certified when the UN sticker is attached. The sticker carries the serial number, aluminum box construction, Packing Group I, maximum gross weight in kilograms, solid material payload, country of manufacture, and the test certificate number.

"UN certification" refers to a container that has passed rigorous performance-oriented testing to ensure it remains intact under the physical stress of transportation. The process is managed by the United Nations, whose member nations have agreed to specific guidelines for transporting hazardous goods: drop resistance, stacking load, leak-proofing, pressure resistance, temperature resilience, and construction quality.

ZARGES cases have obtained UN Packing Group I, the highest level of protection for transporting highly toxic chemicals, flammable substances, or explosives, including Class 9 miscellaneous goods such as lithium-ion batteries.

The Packing Group I rating does not refer to containment of fire. Validation that a container can successfully contain a fire is the responsibility of the end user. Any modification to a case not made by the manufacturer, such as drilling or cutting the aluminum, invalidates the UN certification.

UN certification for hazardous materials →
THE ZARGES DIFFERENCE

SUPERIOR
Protection

Up to 50%
Lighter than plastic cases
2,000 lb
Stacking load
Up to 20%
More interior volume
50+
Standard sizes available

Lightweight & Strong

  • Up to 50% lighter than plastic cases*
  • 70% lighter than roadie cases*
  • Rugged, fully-welded profile frame
  • Will not warp or crack

Durability & Resistance

  • Stacking corners carry 2,000 lb
  • Temperature-stable from −238°F to +302°F; UV, water, weather, and corrosion resistance
  • Ergonomic spring-loaded handles
  • 50+ standard sizes across the range

Optimized Space & Security

  • Up to 20% more interior volume than plastic cases in a smaller footprint
  • IP54 sealed against dust and splashing water as standard
  • Locking options available for theft protection

Specialized Features

  • IGBC (Interagency Grizzly Bear Committee) certified bear-resistant sizes
  • Cases constructed of extra strong 5005 alloy aluminum sheeting

*Comparisons based on industry-standard plastic and roadie cases of equivalent size.

Not Sure Which Size?

FIND YOUR
PERFECT CASE