CASES FOR EVERY
Mission.
19" rack-compatible aluminum cases for electronics, communications, and mission-critical systems. Available in silver, tan, and OD green.
Rugged aluminum transit cases in standard silver, desert tan, and OD green. MIL-STD-810G tested. Available in 30+ sizes.
UN PG I certified cases for lithium-ion batteries, energetics, and hazmat transport. Designed for EV batteries, drone batteries, and ordnance.
Purpose-built for DJI Mavic, Matrice, and custom UAV platforms. Pre-cut foam inserts or patented KOR Technik™ VRS panels for drone and UAV payloads.
Custom-configured cases for medical, communications, weapons, and classified systems. CAGE 51YQ0 — direct government procurement available.
THE SWEPT
Advantage.
Dozens of standard sizes, or fully custom sizes in 1mm increments with minimal NRE, so the enclosure uses only the space the payload requires.
Up to 50% lighter than comparable plastic cases, without sacrificing durability.
Converts to a Faraday cage — tested to >60dB attenuation from 150kHz to 18GHz. HEMP and Tempest requirements can be met (K475 series).
20–40% more interior volume within the same exterior footprint.
Tested from −65°F to +176°F without warping, cracking, or loss of seal.
SUPERIOR
Protection.
Lightweight & Strong
- 50% lighter than plastic cases*
- 70% lighter than roadie cases*
- Rugged, fully-welded profile frame
- Will not warp or crack
Durability & Resistance
- 2-7x greater tensile strength than plastic cases*
- Tested from −65° to +176°F; UV, water, weather, and corrosion resistance
- Ergonomic spring-loaded handles
- Over 50 standard sizes available
Optimized Space & Security
- 15%-20% greater interior volume than plastic cases in a smaller footprint
- IP54 sealed against dust and splashing water as standard
- Locking options available for theft protection
Specialized Features
- IGBC (Interagency Grizzly Bear Committee) models available
- Cases constructed of extra strong 5005 alloy aluminum sheeting
*Comparisons based on industry-standard plastic and roadie cases of equivalent size.
STORAGE, TRANSIT &
Field Deployment.
Base & Depot Storage
ZARGES cases hold their seal and structure through years of depot storage — IP54 protection as standard, with IP65 sealing and IP67 variants available, tested from −65°F to +176°F. The aluminum body won't warp, crack, or lose its gasket seal the way plastic cases do after extended stationary storage.
Transit Between Theaters
Rated to a 2,000 lb stacking load and 20,000+ latch cycles, ZARGES cases are built for repeated loading, palletizing, and transport — not a single trip. UN PG I certification covers lithium-ion battery and hazmat transport between locations.
Field Deployment
In the field, ZARGES cases convert to a Faraday cage on the K475 series — tested to >60dB EMI attenuation from 150kHz to 18GHz — and carry custom foam configurations for mission-specific electronics, optics, and weapons systems.
CERTIFIED &
Compliant.
CAGE 51YQ0 — Commercial and Government Entity code for direct government procurement.
International quality management system certification, held by ZARGES Inc. and audited by DEKRA.
Learn more View ISO DocumentRegistered as a manufacturer with the US State Department's Directorate of Defense Trade Controls (DDTC).
Learn more View ITAR LetterPhase II ready — maintained voluntarily even after the Department of War suspended the Phase II mandate in 2026.
View CMMC Readiness LetterDefense Federal Acquisition Regulation Supplement compliant.
National Institute of Standards and Technology cybersecurity framework.
K470 approved as UN dangerous goods packaging, Packing Group I, for hazmat and lithium-battery transport.
Learn more View BAM DocumentAir Transport Association standard for reusable shipping containers, rated for 100 round trips. K470 tested by Dayton T. Brown, an independent US lab.
View SpecsTECHNICAL SPEC
Sheet.
TESTED TO US MILITARY STANDARDS.
Results from the ZARGES Defence Catalogue. Each test was run by an independent testing institute or on ZARGES' own test rigs, on the case series listed.
Rain & Blowing Rain
40 mph wind, approx. 4 in/h rainfall, minimum 30 minutes per side.
Blowing Dust
20 mph dust-laden wind, two 6-hour runs.
Salt Fog
96 hours salt spray at 95°F (shipboard and coastal service).
Fungus
28 days in fungal-growth conditions (jungle and humid storage).
Wheeled-Vehicle Vibration
Composite wheeled-vehicle vibration profile, shock-mounted rack frame included.
US Highway Truck Vibration
Common-carrier profile for cases shipped by truck on US roads.
Transit Drop
Procedure IV transit drop, simulating drops during handling and shipment.
EMI Shielding
Shielding effectiveness measured to the US standard for electronics enclosures.
Reusable Air Transport
Rated for at least 100 round trips. Tested by Dayton T. Brown, an independent US lab.
Beyond the US standards. The same cases are also qualified to European and NATO defence standards, for example the German military standard VG 95 447, NATO AECTP 400 tracked-vehicle vibration, and UN hazardous-goods packaging type-tested under Germany's federal materials institute (BAM).
NATO Stock Numbers. ZARGES has supplied armed forces for decades. Many Mitraset®, K470 and K475 cases carry NATO Stock Numbers (NSNs) for ordering through the US supply system.
ZARGES WHERE
It counts.
GOVERNMENT
Procurement ready.
ZARGES Inc. is a Registered US Government Supplier (CAGE 51YQ0), ITAR registered, and CMMC 2.0 Level 2 ready — positioned to support direct procurement by federal agencies, military branches, and authorized state and local government entities.
