UN-Certified Packaging

HAZARDOUS
MATERIALS

UN-approved aluminum cases for hazardous goods, infectious substances and lithium batteries, tested and certified at our Charlotte facility.

UN 4B
Approved composite packaging
X-rated
Packing Groups I, II and III
−238° to 302°F
Temperature stability
$75
UN testing in Charlotte, NC
ZARGES K470 case on a warehouse floor beside a forklift, checked against a shipping list
DOT Compliance

Storage and
Transport

ZARGES manufactures UN-approved aluminum cases. They are approved as composite packaging (Code UN 4B, 4BU, 4BV, 4BW, 50B) and are available with UN certification for the transport of hazardous materials.

The U.S. Department of Transportation enforces every hazmat transportation law in the United States, and its rules apply to everyone in the chain: whoever fills, marks and labels a package, prepares the shipping papers, or loads and secures it in a vehicle, container or cargo hold.

Guide: protecting sensitive equipment in transport
Lab technician disinfecting an open ZARGES K470 case in a biosafety lab
Biohazard Handling

Clean, Sealed,
Sterilizable

The smooth, non-porous surface of aluminum can be sanitized easily and repeatedly, and the aluminum withstands −238°F to +302°F without damage or deformation, allowing high-temperature decontamination. Aluminum absorbs impact energy without cracking or rupturing, protecting the contents.

Sanitize at up to 302°F
UN HazMat certification available for K470, K424 XC, K410, and K475 cases
UN-2814 certification for transport of infectious substances
Category 6.2 internal-bag slide-seal approval available
Testing & Certification

UN Certification in Four Steps

Available for the K470, K475, K424 XC and K410. ZARGES Inc. tests each case at our Charlotte facility for a fee of $75.

01

Verify

Each case is confirmed as an authentic ZARGES product and the model ordered.

02

Inspect

Ultrasonic inspection checks the wall thickness is within tolerance at every measuring point.

03

Label

Once the case passes, it is labeled with its UN certification marking.

04

Deliver

The case ships with the applicable documentation.

Inspector measuring a ZARGES case's wall thickness with an ultrasonic gauge
Ultrasonic Inspection

Measured, Not
Assumed

Wall thickness is checked at thirteen set measuring points, marked below. ZARGES also provides regulatory guidance, hazard classification, and interior and exterior packaging recommendations.

Ultrasonic measuring point · 13 per case
View the K470 UN certificate (BAM 8311, PDF)
Common Applications

Built for Every Hazardous Environment

THE ZARGES DIFFERENCE

SUPERIOR
Protection

Up to 50%
Lighter than plastic cases
2,000 lb
Stacking load
Up to 20%
More interior volume
50+
Standard sizes available

Lightweight & Strong

  • Up to 50% lighter than plastic cases*
  • 70% lighter than roadie cases*
  • Rugged, fully-welded profile frame
  • Will not warp or crack

Durability & Resistance

  • Stacking corners carry 2,000 lb
  • Temperature-stable from −238°F to +302°F; UV, water, weather, and corrosion resistance
  • Ergonomic spring-loaded handles
  • 50+ standard sizes across the range

Optimized Space & Security

  • Up to 20% more interior volume than plastic cases in a smaller footprint
  • IP54 sealed against dust and splashing water as standard
  • Locking options available for theft protection

Specialized Features

  • IGBC (Interagency Grizzly Bear Committee) certified bear-resistant sizes
  • Cases constructed of extra strong 5005 alloy aluminum sheeting

*Comparisons based on industry-standard plastic and roadie cases of equivalent size.

Common Questions

HazMat FAQ

UN hazmat packaging is rated to one of three packing groups — X (highest hazard, Packing Group I), Y (medium hazard, Packing Group II), or Z (low hazard, Packing Group III). A case rated X can carry goods assigned to any of the three groups; a case rated only Z can carry Group III goods alone. ZARGES cases are certified to the X rating, and are approved for all three groups.
No — UN-certified aluminum cases are approved as composite packaging, meaning they're the certified outer container, but the regulated material still needs to be in its own inner packaging (a sealed bag, bottle, or absorbent liner) rated for that specific substance. The case and the inner packaging work together to meet the certification.
No. Unlike plastic, aluminum does not age, so a certified aluminum case does not require periodic re-testing the way some other packaging materials do — a visual check for external damage before each shipment is sufficient.
The UN number and packing group system is the international classification a hazardous substance is assigned. DOT (49 CFR) is how the U.S. applies that system to ground transport, and IATA's Dangerous Goods Regulations apply it to air transport. The same UN-certified ZARGES case can satisfy all three, since the underlying packaging certification is the same — only the shipping paperwork and carrier rules differ by mode.
UN PG I, UN-2814 for infectious substances, and Category 6.2 internal-bag slide-seal approval, depending on model.
Certified for What Matters Most

SHIP HAZARDOUS
MATERIALS WITH CONFIDENCE

Anything else? Contact our team.