Featured Case
K475

OCEANOGRAPHY & ACADEMIC

Cases for Research and Academic Institutions

ZARGES aluminum cases carry oceanographic instruments, laboratory equipment, sensors, samples and artwork for universities, research institutes and expedition teams. They are sealed against dust and water (IP54 as standard, IP67 on the K475), temperature-stable from −238°F to +302°F, carry a 2,000 lb stacking load, and take custom-cut foam that holds each instrument in place.

The same cases go from the lab bench to a research vessel, a polar station or a remote field camp, and back again season after season. Made in Germany since 1933, with a 10-year warranty.

−238°F to +302°F
Temperature Stability
IP54 to IP67
Ingress Protection
2,000 lb
Stacking Load
10 Years
Warranty
Applications

BUILT FOR
RESEARCH IN THE FIELD

OCEANOGRAPHIC INSTRUMENTS & SENSORS

RESEARCH VESSELS & DOCKSIDE LOADING

POLAR & REMOTE FIELD STATIONS

LABORATORY EQUIPMENT TRANSPORT

ROBOTICS, DRONES & SAMPLING GEAR

MUSEUM ARTWORK & ARTIFACTS

Sealed Against Salt Spray & Water

Every K470 is IP54 sealed against dust and splashing water. The seal-welded K475 is rated IP67, dust-tight and protected against temporary immersion, for instruments that ride on deck or in open boats.

Humidity & Pressure Control

The K475 carries a pressure relief valve with a humidity indicator, so a case flown to a station or shipped through a cargo hold opens without a vacuum and shows whether moisture got in. A desiccant compartment and an inert-gas fill coupling are available on order.

Cold, Heat & Corrosion

Temperature-stable from −238°F to +302°F. The 5005 aluminum forms its own oxide layer and does not rust, so a case that spends a season at sea or on the ice comes home in working order.

Foam Cut to the Instrument

Foam liners, foam fill and fully custom-cut inserts hold sensors, optics and samplers apart and still. Interiors are designed with you and cut before the case ships.

Stacks in a Hold or a Container

Cast stacking corners and a fully welded frame carry a 2,000 lb stacking load. K470 cases that share a footprint stack securely together, which keeps a mixed shipment tidy.

Approved for Regulated Cargo

The K470 is UN Packing Group I approved, and the K475 can be UN certified, for hazardous goods such as lithium batteries, chemicals and preserved samples (the UN label is ordered separately). EMI shielding is available on the K475.

In the Field
Common Questions

FAQ

Most research teams use the ZARGES K470: a lightweight aluminum case, IP54 sealed, temperature-stable from −238°F to +302°F, with custom foam cut to the instrument. When the equipment must survive immersion, pressure changes or regulated shipping, the K475 adds an IP67 seal-welded body, a pressure relief valve with humidity indicator and optional EMI shielding.
The K470 is IP54, sealed against dust and splashing water. The K475 is IP67: dust-tight and protected against temporary immersion. For gear that rides on deck or in small boats, choose the K475.
Yes. ZARGES aluminum keeps its properties from −238°F to +302°F. The cases do not crack in the cold the way plastic cases can.
Yes, with the right case. The K470 is UN Packing Group I approved and the K475 can be UN certified for hazardous goods; the UN label is ordered separately. Lithium-ion battery cases are listed on the battery protection page. Battery Protection
Yes. Send the instrument's dimensions or a drawing and ZARGES designs a foam insert for it. Production starts after you approve the final design. Custom Capabilities
Contact ZARGES with the equipment list and quantities for a quote. Custom sizes, interiors and fittings are quoted per project. Request a Quote
Not Sure Which Size?

FIND YOUR
PERFECT CASE